Industrial Ergonomics
Learning objectives
Recall the underlying principle of ergonomics in the workplace and core risk factors
Identify causes of CTDs
Recognize common types of cumulative trauma disorders
Match warning signs and symptoms with solutions and actions
Identify ergonomic principles
Recognize elements of an effective ergonomic health and safety program
Course overview
Poor ergonomics can lead to cumulative traumatic musculoskeletal disorders (MSDs) that put strain on our bodies. There are very good reasons for accounting for the ergonomic health of your workforce, because musculoskeletal injuries, once developed, can keep people off of the job for life.
Statistics: According to the Occupational Safety & Health Administration (OSHA), industries with the highest musculoskeletal disorders rates include health care, transportation, warehousing, retail, and wholesale trade and construction.
The term “ergonomics” refers to making the workplace conducive to the comfort and productivity of the employee. Applying ergonomic principles helps workers avoid on-the-job illness and injury and improves worker job satisfaction through measures that provide a greater comfort, helping people to perform assigned tasks more naturally.
Cumulative trauma disorders (CTDs) come from physical demands that exceed our maximum capacity; that put strain on tendons, muscles, nerves, joints, ligaments, cartilage or the spine; or that disregard environmental factors like heat, humidity, noise and glare which can cause stress. For example, think of young man who moves heavy, awkward furniture on a daily basis, with poor technique and disregard for or ignorance of future consequences of straining back muscles and bone beyond limitations. Eventually, the back will become sore and give out, jeopardizing the man’s livelihood and negatively impacting the employer’s workers compensation rating.
CTDs are the result of an accumulation of stress factors involving repetitive, forceful, or prolonged exertions; frequent or heavy lifting, pushing, pulling, or carrying of heavy objects; or prolonged awkward postures. Carpal tunnel syndrome is a commonly cited issue alleviated by a bit of attention to ergonomics.
There are ten general principles of ergonomics which are used to evaluate the “fit” of a work area. Some relate to changes the worker can make on his/her own while others suggest changes the employer could make.
Work in a neutral posture. The spine has a natural “S” curve. When possible, maintain that natural curve, whether sitting or standing.
Reduce excessive force. Use tools to help with pulling, pushing and lifting. Use boxes that have handholds.
Keep your work tools in easy reach. Arrange your work area so that things you use often do not require a stretch to reach.
Work at proper heights. When sitting, most work should be done at elbow height. A good example of this is working at a computer.
Reduce excessive stressful motions. A simple way is to use power tools whenever possible. Evaluate the work situation and make changes to eliminate excessive repeated motions.
Minimize fatigue and static load. Staying in the same position creates static load and leads to fatigue and cramping. Using tools to hold parts in place and changing your body position can reduce static load.
Minimize the pressure of your body on other surfaces. For example, when you squeeze a tool, you are creating pressure points on your hands. Using a tool that is contoured to fit your hand or that has a cushioned grip lessens the pressure.
Your work area must also be set up to have enough room so that you can work in a comfortable position without having your head, arms, elbows, knees or feet in unnatural or cramped positions.
As you use your body to work each day, remember that we are meant to move, exercise and stretch. Your muscles need to be used and strengthened and your heart rate needs to be elevated on occasion. Be sure to change positions, stretch, and move often throughout the day.
Maintain a comfortable environment.
Here are two easy tips: to maintain the “S” curve in your back when standing for long periods, it helps to put one foot on a footrest. When sitting, beware of relaxing into a “C” curve, which can put strain on your back. Good lumbar support in a chair can help maintain the proper curve in the small of your back.
When lifting, bending over in a “V” shape creates pressure on the back. If you must bend frequently to lift items, look for mechanical means to reduce the amount of bending you must do. Keep your neck aligned with the rest of the spinal column. Prolonged twisted and bent positions are stressful. Adjust equipment if necessary to allow your neck to be in its neutral position. Keep your elbows at their sides. Adjust the work area height if necessary. Keep your wrists in neutral position with the hand in the same plane as the forearm. Use tools that allow your wrist to assume this position.
English, Spanish
Mobile Ready
20 min
Training Shorts
Course Outline
Course Outline
Introduction
What Are CTDs?
Warning Signs, Symptoms, and Solutions
Prevention: Ergonomic Safety and Health Program
Regulations
Regulations
OSH Act of 1970, General Duty Clause, Section 5 (a)(1)(2)
OTHER LIBRARIES
LIBRARY GROUPS
Compliance Plus is a group of libraries that gives you the flexibility to assign your workforce any number of the courses listed below. This includes all courses from the Occupational Safety & Health, Environmental Management, Human Resources, Transportation, Canadian Safety & Health, Food Manufacturing, Higher Education, Healthcare, and Training Shorts Libraries for one low price!
You can purchase this course in the following ways:
Library Group Level
Click here to add your own content, or connect to data from your collections.
Priced from:
$550/mo.
Monthly or Annual
Features
Additional Features
load more
Course Reviews
Reviews
98% would recommend